2016 EXMARK LAZER X 34 HP KOHLER EFI RED TEC WITH 1456 HRS. JUST SERVICED AND READY TO GO
Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
A New Level of Comfort: Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Air Filter: Heavy duty canister air filtration system.
Steering & Motion Control: Hydraulically dampened twin levers, adjustable both fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Turning Radius: True zero-turn.
Casters: 0.50"-thick caster yoke arm.
Front Caster Tires: 13"x 6.5-6", smooth-tread, pneumatic.
Drive Tires: 24"x12.0-12", 4-ply Turf Master.
Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Parking Brake: Lever-actuated disc brake.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
Blades: 3 Blades at 20.50" [0.20"-thick (5.1 mm) alloy steel]
Cutting Width: 60" UltraCut™ Series 6 (152.4 cm)
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
Weight: 1264 lbs.
Width: 72.8 in. (184.9 cm)
Length: 83.1 in. (211.1 cm)
Height: 70.0 in. (177.8 cm)
Drive System: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy duty components. 16cc pumps and 17.1 cubic inch motors.
Speed: Up to 11.5 mph (18.5 kmph) forward, and up to 6.0 mph (9.7 kmph) reverse
PTO Engagement: MagStop Electromagnetic 250 ft-lb clutch with spot brake.
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Electrical System: 12-V battery with 25-amp alternator.
Engine Hour Meter: Standard.
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style: Full-floating, with heavy duty spindle. Side-discharge standard with the option to bag or mulch.
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Tractor Frame: Unibody, welded, heavy duty 1.5"x3" tubular steel.
Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30 mm (1.18") diameter spindle shaft and splined blade driver.